The UdderSinge Process - Easy - Fast - Safe - Effective
“The cow never knows there is work being done on her because of the low temperature of the flame and the quick pass of the wand. UdderSinge uses a low temperature flame to remove hair from the udder and belly. It was designed to remove hair quickly and painlessly, eliminating the need to clip udders manually.
To Use UdderSinge:
- Remove any bedding from the udder.
- Quickly pass the wand under the udder about 2-4” below the udder and belly then up the rear udder (1-2 seconds).
- Use mitt if needed to extinguish any small flare-ups.
- The UDDER SINGE can also be used to singe tails. Clip bushy tails, then hold tail away from animal & singe.
See How Quick & Easy the UdderSinge Process Is:
1. The relatively cool 6" flame
2. The udder before singeing.
3. Also before singeing
4. Singeing the udder.
5. Singeing the belly.
6. Trimming the switch at the end of the tail.
7. Singeing the tail.
8. The clean udder and tail.
9. The Finished UdderSinged Udder.